This case study shows how a large flooring manufacturer took advantage of a Uniflow Model 4230 to extend its roll-coating operations to a sister plant.
THE UNIFLOW ADVANTAGE
Companies prefer Uniflow drum unloaders for many reasons. Our machines are reliable, cost-effective, and pump viscous hot melts, such as PUR, significantly faster than competing units.
Benefits of using a […]
This case study describes how a Uniflow Model 4230 helped Cascade Windows improve the efficiency of their hot melt butyl application.
HOT MELT DRUM UNLOADER EQUIPMENT MANUFACTURING
Uniflow drum unloaders pump high viscosity hot melts at higher rates than competing machines – a lot faster. This is achieved with a unique platen that has nearly double the […]
A leading manufacturer takes the guesswork out of project justifications by offering free testing of their hot melt equipment.
The purchase of new capital equipment is justified by the equipment’s capability, reliability, and payback. Here are a few questions to ask if you’re considering a capital equipment purchase:
Will your new manufacturing line be able to […]
Hot melt drum unloaders are used to heat high-viscosity polymers and pump them into a customer’s manufacturing process.
Some of the hot melt materials that are typically processed include:
Pressure Sensitive Adhesives (PSA)
Polyurethane Reactive Adhesives (PUR)
Butyl
Cable Sealants
Among many others
Manufacturing processes that use hot melt drum unloaders include roll coating, cable manufacturing, spray […]
This case study demonstrates the significant advantages of the Model 230 Uniflow, specifically at Functional Coatings, a custom, private label contract manufacturing company.
Hot Melt Drum Unloader Equipment Manufacturing
Manufacturers have historically chosen Uniflow drum unloaders when facing unique challenges. We have pumped materials at rates up to 2,000 pounds/hour and with viscosities as high as […]
Worthen had recently installed two new hot melt drum unloaders built by a competitor, each of which was expected to pump 600 lbs of pressure-sensitive adhesive (PSA) per hour, but only ended up pumping 325-350 lbs per hour. That’s when UNIflow stepped in.
