Request a Quote

Blog

Best Hot Melt Drum Unloaders

From abrasives to insulations, cable to carbon fibers, if your industry involves pumping bulk adhesives, coatings or sealants then you are going to need large-volume drum unloading equipment. Whether you are investing or upgrading, here are some of the leading hot melt drum unloaders you should be looking at.
UNIFLOW 
Based in Richmond, VA, Industrial Machine Manufacturing’s […]

By |August 16th, 2022|Uncategorized|Comments Off on Best Hot Melt Drum Unloaders

14 COMMON PROBLEMS WITH HOT MELT DRUM UNLOADERS

Sooner or later, every hot melt application process must deal with unwanted issues. While manufacturers often troubleshoot difficulties on their own, it’s useful to know whether the problem is avoidable—and to learn about the fixes you can try.

This post will list a few of the common problems with hot melt drum unloaders and how to […]

By |June 23rd, 2022|Uncategorized|Comments Off on 14 COMMON PROBLEMS WITH HOT MELT DRUM UNLOADERS

[CASE STUDY] – HOW A FLOORING MANUFACTURER ENSURED PRODUCTION WITH UNIFLOW

This case study shows how a large flooring manufacturer took advantage of a Uniflow Model 4230 to extend its roll-coating operations to a sister plant.
THE UNIFLOW ADVANTAGE
Companies prefer Uniflow drum unloaders for many reasons. Our machines are reliable, cost-effective, and pump viscous hot melts, such as PUR, significantly faster than competing units.

Benefits of using a […]

By |April 8th, 2022|Case Studies|Comments Off on [CASE STUDY] – HOW A FLOORING MANUFACTURER ENSURED PRODUCTION WITH UNIFLOW

Material Waste With Inefficient Hot Melt Drum Melters

It can be surprising to realize how much adhesive a hot melt drum melter leaves behind after it’s done pumping. This waste doesn’t bother some manufacturers, but for others, it noticeably cuts into profits (especially with the rising cost of materials).

The good news is, it doesn’t have to be this way because, with a Uniflow […]

By |January 6th, 2022|Uncategorized|Comments Off on Material Waste With Inefficient Hot Melt Drum Melters

5 Reasons To Switch to a Uniflow Hot Melt Drum Melter

People sometimes chance upon Uniflow. Perhaps they found us after a competing machine couldn’t pump fast enough for the job. Or they had another manufacturer vouch for the reliability of our hot melt drum melters. No matter how a business learns about our unloaders, they almost immediately realize it’s worth switching.

Here are five of the […]

By |November 29th, 2021|Uncategorized|Comments Off on 5 Reasons To Switch to a Uniflow Hot Melt Drum Melter

INCREASE PRODUCTIVITY BY 40% WITH THE RIGHT HOT MELT DRUM MELTER

By |October 26th, 2021|IMMCO News|Comments Off on INCREASE PRODUCTIVITY BY 40% WITH THE RIGHT HOT MELT DRUM MELTER

WHICH HOT MELT DRUM MELTER IS RIGHT FOR YOUR APPLICATION?

By |September 17th, 2021|Uncategorized|Comments Off on WHICH HOT MELT DRUM MELTER IS RIGHT FOR YOUR APPLICATION?

[CASE STUDY] – HOT MELT DRUM UNLOADER FOR HIGH VISCOSITY LIQUIDS

This case study describes how a Uniflow Model 4230 helped Cascade Windows improve the efficiency of their hot melt butyl application.
HOT MELT DRUM UNLOADER EQUIPMENT MANUFACTURING
Uniflow drum unloaders pump high viscosity hot melts at higher rates than competing machines – a lot faster. This is achieved with a unique platen that has nearly double the […]

By |August 31st, 2021|Case Studies|Comments Off on [CASE STUDY] – HOT MELT DRUM UNLOADER FOR HIGH VISCOSITY LIQUIDS

Want to See Our Hot Melt Drum Melters In Person?

Skepticism is important when you’re buying new equipment for your business. You’re spending someone else’s money and your reputation is at stake. It’s going to reflect badly on you if the equipment doesn’t work the way you expected.

The way to be sure a Uniflow hot melt drum melter will deliver the promised performance is to […]

By |July 27th, 2021|Uncategorized|Comments Off on Want to See Our Hot Melt Drum Melters In Person?

10 Signs It’s Time To Upgrade Your Hot Melt Dispensing System

Holt melt adhesives are increasingly important in modern manufacturing. They’re used in industries from textiles and furniture to food and beverage packaging, and many users are switching from solvent-based adhesives to hot melts.

What’s behind this growth? Industry experts note that hot melts are easier to use than two-part epoxies and hold and set times can […]

By |July 6th, 2021|Uncategorized|Comments Off on 10 Signs It’s Time To Upgrade Your Hot Melt Dispensing System